Model Number(s): 4PGE13E

REFRIGERANT SYSTEM

Heavy-duty, high efficiency scroll compressor
Copper tubing with enhanced fin coils
R410a refrigerant

HEAT EXCHANGER

Aluminized steel tubular

CABINET

Insulation to minimize heat loss
Powder paint for maximum durability
Easy service access
Louvered grille to protect condenser coil
One piece "no leak" top design
Weather protected heavy-duty condenser fan motor
Aluminum fan for long life
Internal filter rack

BLOWER

Insulated compartment to reduce sound
Easy service split-ring design with quick plug-in wiring
PCS pre-lubricated motor for low maintenance and maximum efficiency
Dynamically balanced blower wheel with resilient motor mounts for smooth and quiet operation

CONTROLS

Trade available components
Solid state integrated blower control/ignition control board with L.E.D. diagnostics
Color coded wiring for easy service

INSTALLATION

Horizontal or down discharge
L models comply with California Low NOx regulations
Rectangular duct covers

ACCESSORIES

Hinged Roofcurb
Lifting Brackets
Internal Filter Kits
Low Ambient Kit
LP Gas Conversion

4PGE13E

10 year limited parts warranty / lifetime heat exchanger warranty available.

See limited warranty documents for details.

Model Number(s): 4PGE15

REFRIGERANT SYSTEM

Heavy-duty, high efficiency scroll compressor
Copper tubing with enhanced fin coils

HEAT EXCHANGER

Aluminized steel tubular

CABINET

Insulation to minimize heat loss
Powder paint for maximum durability
Easy service access
Louvered grille to protect condenser coil
One piece "no leak" top design
Weather protected heavy-duty condenser fan motor
Aluminum fan for long life
Internal filter rack

BLOWER

Insulated compartment to reduce sound
Easy service split-ring design with quick plug-in wiring
ECM variable speed motor for low maintenance and maximum efficiency
Dynamically balanced blower wheel with resilient motor mounts for smooth and quiet operation

CONTROLS

Comfort AltertTM diagnostic continually monitors system operation for easy service
Solid state integrated blower control/ignition control board with L.E.D. diagnostics
Color coded wiring for easy service

INSTALLATION

Horizontal or down discharge
All models comply with California Low NOx regulations
Rectangular duct covers

ACCESSORIES

Hinged Roofcurb
Lifting Brackets
Internal Filter Kits
Low Ambient Kit
LP Gas Conversion

4PGE15

10 year limited parts warranty / lifetime heat exchanger warranty available.

See limited warranty document for details.

Model Number(s): 2PGE13E

REFRIGERANT SYSTEM

Heavy-duty, high efficiency scroll compressor
Copper tubing with enhanced fin coils

HEAT EXCHANGER

Aluminized steel tubular

CABINET

Insulation to minimize heat loss
Powder paint for maximum durability
Easy service access
Louvered grille to protect condenser coil
One piece "no leak" top design
Weather protected heavy-duty condenser fan motor
Aluminum fan for long life

BLOWER

Insulated compartment to reduce sound
Easy service split-ring design with quick plug-in wiring
PSC prelubricated motor for low maintenance and maximum efficiency
Dynamically balanced blower wheel with resilient motor mounts for smooth and quiet operation

CONTROLS

Trade available components
Solid state integrated blower control/ignition control board with L.E.D. diagnostics
Color coded wiring for easy service

INSTALLATION

Horizontal or down discharge
L models comply with California Low NOx regulations
Rectangular duct covers

ACCESSORIES

Hinged Roofcurb
Lifting Brackets
Internal Filter Kits
LP Gas Conversion

2PGE13E

10 year limited parts warranty available (5 year compressor)

See limited warranty document for details

Model Number(s): 4PHP15E

REFRIGERANT SYSTEM

Heavy-duty, high efficiency scroll compressor
Copper tubing with enhanced fin coils
R410a refrigerant environmentally friendly

CABINET

Insulated to minimize heat loss
Baked polyester paint finish over galvanized steel for maximum durability
Easy service access
Louvered grille to protect condenser coil
One piece "no leak" top design
Weather protected heavy-duty condenser fan motor

BLOWER

Insulated compartment to reduce sound
Easy service split-ring design with quick plug-in wiring
ECM variable speed motor for low maintenance and maximum efficiency
Dynamically balanced blower wheel with resilient motor mounts for smooth and quiet operation

CONTROLS
Trade available components
Defrost control features built in diagnostics for easier service
Defrost control has short cycle protection to protect the compressor
Defrost cycle is field selectable 30/60/90 minutes
Defrost control is Quiet Shift™ capable
High pressure switch for system protection
Color coded wiring for easy service

INSTALLATION

Horizontal or down discharge

ACCESSORIES

Hinged Roofcurb 8 inch and 14 inch
Lifting Brackets
Filter Rack Kit
Electric Strip Heat Kits (5 - 20 kW)
Single Point Power Entry Kit

4PHP15E

Package Heat Pump

10 year limited parts warranty available

Model Number(s): 4PHP13E

REFRIGERANT SYSTEM

Heavy-duty, high efficiency scroll compressor
Copper tubing with enhanced fin coils
R410a refrigerant environmentally friendly

CABINET

Insulation to minimize heat loss
Baked polyester paint finish over galvanized steel formaximum durability
Easy service access
Louvered grille to protect condenser coil
One piece "no leak" top design
Weather protected heavy-duty condenser fan motor

BLOWER
Insulated compartment to reduce sound
Easy service split-ring design with quick plug-in wiring
PSC prelubricated multi-speed motor for low maintenance and maximum efficiency
Dynamically balanced blower wheel with resilient motor mounts for smooth and quiet operation

CONTROLS

Integrated control with LED diagnostics
Trade available components
Defrost control features built in diagnostics for easier service
Defrost control has short cycle protection to protect the compressor
Defrost cycle is field selectable 30/60/90 minutes
Defrost control is Quiet Shift™ capable
High pressure switch for system protection
Color coded wiring for easy service

INSTALLATION

Horizontal or down discharge

ACCESSORIES

Hinged Roofcurb 8 inch and 14 inch
Lifting Brackets
Filter Rack Kit
Electric Strip Heat Kits (5 - 20 kW)
Single Point Power Entry Kit

4PHP13E

10 year limited parts warranty available

Model Number(s): 2PHP13E

REFRIGERANT SYSTEM

Heavy-duty, high efficiency scroll compressor
Copper tubing with enhanced fin coils
R22 refrigerant

CABINET

Insulation to minimize heat loss
Baked polyester paint finish over galvanized steel for maximum durability
Easy service access
Louvered grille to protect condenser coil
One piece "no leak" top design
Weather protected heavy-duty
condenser fan motor

BLOWER

Insulated compartment to reduce sound
Easy service split-ring design with quick plug-in wiring
PSC prelubricated multi-speed motor for low maintenance and maximum efficiency
Dynamically balanced blower wheel with resilient motor mounts for smooth and quiet operation

CONTROLS

Integrated control with LED diagnostics Trade available components
Defrost control features built in diagnostics for easier service
Defrost control has short cycle protection to protect the compressor
Defrost cycle is field selectable 30/60/90 minutes
Defrost control is Quiet Shift™ capable
Color coded wiring for easy service

INSTALLATION

Horizontal or down discharge

ACCESSORIES
Hinged Roofcurb 8 inch and 14 inch
Lifting Brackets
Filter Rack Kit

Electric Strip Heat Kits (5 - 20 kW)
Single Point Power Entry Kit

2PHP13E

10 year limited parts warranty available (5 year compressor)

See limited warranty document for details

Model Number(s): 4PCE15E

REFRIGERANT SYSTEM

Heavy-duty, high efficiency scroll compressor
Copper tubing with enhanced fin coils
R410a refrigerant environmentally friendly

CABINET

Insulated to minimize heat loss
Baked polyester paint finish over galvanized steel for maximum durability
Easy service access
Louvered grille to protect condenser coil
One piece "no leak" top design
Weather protected heavy-duty condenser fan motor

BLOWER

Insulated compartment to reduce sound
Easy service split-ring design with quick plug-in wiring
ECM variable speed motor for low maintenance and maximum efficiency
Dynamically balanced blower wheel with resilient motor mounts for smooth and quiet operation

INSTALLATION

Horizontal or down discharge

ACCESSORIES

Hinged Roofcurb 8 inch and 14 inch
Lifting Brackets
Filter Rack Kit
Electric Strip Heat Kits (5 - 20 kW)
Single Point Power Entry Kit

4PCE15E

10 year limited parts warranty available

Model Number(s): 4PCE13E

REFRIGERANT SYSTEM

Heavy-duty, high efficiency scroll compressor
Copper tubing with enhanced fin coils
R410a refrigerant environmentally friendly

CABINET

Insulation to minimize heat loss
Baked polyester paint finish over galvanized steel for maximum durability
Easy service access
Louvered grille to protect condenser coil
One piece "no leak" top design
Weather protected heavy-duty condenser fan motor

BLOWER

Insulated compartment to reduce sound
Easy service split-ring design with quick plug-in wiring
PSC prelubricated multi-speed motor for low maintenance and maximum efficiency
Dynamically balanced blower wheel with resilient motor mounts for smooth and quiet operation

INSTALLATION

Horizontal or down discharge

ACCESSORIES

Hinged Roofcurb 8 inch and 14 inch
Lifting Brackets
Filter Rack Kit
Electric Strip Heat Kits (5 - 20 kW)
Single Point Power Entry Kit

4PCE13E

10 year limited parts warranty available

Model Number(s): 2PCE13E

REFRIGERANT SYSTEM

Heavy-duty, high efficiency scroll compressor
Copper tubing with enhanced fin coils
R22 refrigerant

CABINET

Insulation to minimize heat loss
Baked polyester paint finish over galvanized steel for maximum durability
Easy service access
Louvered grille to protect condenser coil
One piece "no leak" top design
Weather protected heavy-duty condenser fan motor

BLOWER

Insulated compartment to reduce sound
Easy service split-ring design with quick plug-in wiring
PSC prelubricated multi-speed motor for low maintenance and maximum efficiency
Dynamically balanced blower wheel with resilient motor mounts for smooth and quiet operation

CONTROLS

Trade available components
Color coded wiring for easy service

INSTALLATION

Horizontal or down discharge

ACCESSORIES

Hinged Roofcurb 8 inch and 14 inch
Lifting Brackets
Filter Rack Kit
Electric Strip Heat Kits (5 - 20 kW)
Single Point Power Entry Kit

2PCE13E

10 year limited parts warranty available (5 year compressor)

See limited warranty document for details

Model Number(s): G2D95

HEAT EXCHANGER DESIGN

409 Stainless steel primary heat exchanger material
AL29-4C Stainless steel secondary heat exchanger
Weldless crimped S-curve primary heat exchanger design for maximum durability

BURNERS

Aluminized steel in shot burners for smooth ignition
Isolated burner enclosure for quiet operation

CABINET CONSTRUCTION

Unitized construction for cabinet integrity
Heat exchanger compartment and blower compartment insulated to increase efficiency and reduce sound levels
Baked on prepainted steel cabinet finish

AIR DELIVERY SYSTEM

ECM variable speed blower motor
Motor features "soft start" and "soft stop" for quiet operation
Active and passive dehumidification feature
Easily removable slide-out blower design
Dynamically balanced blower wheel with resilient motor mounts for smooth and quiet operation

CONTROLS

Two stage gas valve
Integrated ignition and fan control
System Sentry™ control features five (5) fault codes with push button memory recall, regardless of power interruption
Hot surface ignition system uses high density mini ignitor with stainless steel shroud
Control features 120 volt electronic air cleaner and humidifier terminals
Control circuit is fuse protected
Color coded control wiring
Compatible with single or two stage thermostats for heating
Two stage thermostat is required when installed with two stage cooling unit.

Enhanced 95% Gas Furnaces Two-Stage — Variable Speed Counterflow

G2D95

Upflow/Horizontal

INSTALLATION FEATURES

Left or right gas and electric entry
Laser cut base for easy removal of knockout for bottom return applications

WARRANTY

10 year limited parts warranty / lifetime heat exchanger warranty available.

See limited warranty document for details.

Model Number(s): G2D93



Call for Price.

Model Number(s): G1D93



Call for Price.

Model Number(s): G1D91



Call for Price.

Model Number(s): G2D80V



Call for Price.

Model Number(s): G2D80



Call for Price.

Model Number(s): G1D80



Call for Price.

Model Number(s): G1N80



Call for Price.

Model Number(s): LUF80V

HEAT EXCHANGER

¦ Heavy duty 14 gauge steel for long life and quiet operation
¦ Dense ceramic combustion chamber for clean, even combustion and quiet operation
¦ Easy access large diameter stainless steel clean out ports for years of easy cleaning access

CABINET

¦ Foil-faced high density fiberglass insulation reduces both heat loss and sound
¦ Polyester painted steel for maximum durability and corrosion resistance
¦ Cleanable external filter and rack provided

BLOWER

¦ ECM variable speed motor for the ultimate in efficiency and flexibility
¦ Slow quiet blower ramp-up and blower ramp-down
¦ Automatically adjusts airflow to compensate for the installation and environment
¦ Continuous fan is at 50% of cooling CFM providing quiet comfortable air movement and even temperatures throughout the home
¦ Indoor Air Quality add-ons can be run year round for a fraction of the cost of a traditional PSC motor
¦ When used with central cooling system will increase the system’s performance while helping the cooling system better control humidity

BURNER

¦ High quality Beckett Flame Retention burner for efficient combustion
¦ High efficiency PSC burner motor to provide consistent operation through all operating conditions
¦ Solid state ignition provides a consistent 10,000 volts for clean smooth combustion

CONTROLS

¦ Honeywell 7184B primary control with 15 second pre-purge to help maintain clean combustion. Also provides LED diagnostics, limited reset and interrupted ignition
¦ Color coded wires for easy installation and service
¦ 24 volt, 40 VA transformer and controls for easy add-on cooling
¦ Field adjustable cooling CFM to match the application
¦ Control board provides diagnostics

VENTING

¦ Includes standard barometric damper
¦ Optional sidewall vent kit

ACCESSORIES

¦ Coil cabinet
¦ Cleanout brush kit
¦ Side return air cabinet
¦ External filter kit for single side entry and over 1600 CFM
¦ Combustion Air Kit - provides a means to bring combustion air from outside directly to burner (ABOOT571)

WARRANTY

Limited lifetime warranty on heat exchanger
5 year limited warranty on all parts
Extended warranties available

Model Number(s): LBF/R80V

HEAT EXCHANGER

¦ Heavy duty 14 gauge steel for long life and quiet operation
¦ Dense ceramic combustion chamber for clean, even combustion and quiet operation
¦ Easy access large diameter stainless steel clean out ports for years of easy cleaning access

CABINET

¦ Foil-faced high density fiberglass insulation reduces both heat loss and sound
¦ Polyester painted steel for maximum durability and corrosion resistance
¦ Filters and rack provided

BLOWER

¦ ECM variable speed motor for the ultimate in efficiency and flexibility
¦ Provides slow quiet blower ramp-up and blower ramp-down
¦ Automatically adjusts airflow to compensate for the installation and environment
¦ Continuous fan is at 50% of cooling CFM providing quiet comfortable air movement and even
temperatures throughout the home
¦ Indoor Air Quality add-ons can be run year round for a fraction of the cost of a traditional PSC motor
¦ When used with central cooling system will increase the system’s performance while helping the cooling system better control humidity

BURNER

¦ High quality Beckett AFG Flame Retention burner for clean, efficient combustion
¦ High efficiency PSC burner motor to provide consistent operation through all operating conditions
¦ Solid state ignition provides a consistent 10,000 volts for clean smooth combusion

CONTROLS

¦ Honeywell 7184B primary control with 15 second pre-purge to help maintain clean combustion. Also provides LED diagnostics, limited reset and interrupted ignition
¦ Color coded wires for easy installation and service
¦ 24 volt, 40 VA transformer and controls for easy add-on cooling
¦ Field adjustable cooling CFM to match the application
¦ Control board provides diagnostics

VENTING

¦ Includes standard barometric damper
¦ Optional sidewall vent kit

ACCESSORIES

¦ Coil cabinet adapters
¦ Cleanout brush kit
¦ Combustion Air Kit - provides a means to bring combustion air from outside directly to burner (ABOOT571)

WARRANTY

Limited lifetime warranty on heat exchanger
5 year limited warranty on all parts
Extended warranties available

Model Number(s): LHF/LHR80V

HEAT EXCHANGER

¦ Heavy duty 14 gauge steel for long life and quiet operation
¦ Dense ceramic combustion chamber for clean, even combustion and quiet operation
¦ Easy access large diameter stainless steel clean out ports for years of easy cleaning access

CABINET

¦ Foil-faced high density fiberglass insulation reduces both heat loss and sound
¦ Polyester painted steel for maximum durability and corrosion resistance
¦ Cleanable external filter and rack provided

BLOWER

¦ ECM variable speed motor for the ultimate in efficiency and flexibility
¦ Provides slow quiet blower ramp-up and blower ramp-down
¦ Automatically adjusts airflow to compensate for the installation and environment
¦ Continuous fan is at 50% of cooling CFM providing quiet comfortable air movement and even temperatures throughout the home
¦ Indoor Air Quality add-ons can be run year round for a fraction of the cost of a traditional PSC motor
¦ When used with central cooling system will increase the system’s performance while helping the cooling system better control humidity

BURNER

¦ High quality Beckett Flame Retention burner for efficient combustion
¦ High efficiency PSC burner motor to provide consistent operation through all operating conditions
¦ Solid state ignition provides a consistent 10,000 volts for clean smooth combustion

CONTROLS

¦ Honeywell 7184B primary control with 15 second pre-purge to help maintain clean combustion. Also provides LED diagnostics, limited reset and interrupted ignition
¦ Color coded wires for easy installation and service
¦ 24 volt, 40 VA transformer and controls for easy add-on cooling
¦ Field adjustable cooling CFM to match the application
¦ Control board provides diagnostics

VENTING

¦ Includes standard barometric damper
¦ Optional sidewall vent kit

ACCESSORIES

¦ Cleanout brush kit
¦ External filter kit for single side entry and over 1600

CFM

¦ Combustion Air Kit - provides a means to bring combustion air from outside directly to burner (ABOOT571)

WARRANTY

Limited lifetime warranty on heat exchanger
5 year limited warranty on all parts
Extended warranties available

Model Number(s): 4SHP18LT

COMPRESSOR

High-efficiency 2-stage Copeland UltraTechTM scroll compressor
R410a refrigerant
Grommet-mounted compressor for quiet operation
Internally protected against high temperature motor overload conditions
Heavy-duty compressor sound blanket for quiet operation

CABINET

Full metal louvered panels remove with just two screws per panel for easy coil cleaning and service
Controls located in corner post for easy installation and service
Rounded corners for safety and attractive, clean appearance
Baked polyester paint finish over galvanized steel for maximum durability
PVC coated wire fan discharge grille
External gauge ports for easy service

COILS

Enhanced aluminum fins and copper tubing for higher efficency and capacity
Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow

DESIGN

Designed for ambients up to 125°F

COMPONENTS

Bi-flow filter drier factory installed for system protection
Service valves positioned for quick installation and easy service
Variable speed condenser fan motor with swept-wing fan blade
High and low pressure switches factory installed
Comfort Alert 2TM diagnostics; displaying up to nine fault codes is factory installed
Trade available components
Factory-installed crank case heater
QuietShiftTM technology during defrost cycle, to control sound

4SHP18LT

10-year limited parts warranty available

Model Number(s): 4SHP16LT

COMPRESSOR

High efficiency 2 stage Copeland UltraTechTM scroll compressor
R410a refrigerant
Grommet mounted compressor for quiet operation
Internally protected against high temperature motor overload conditions
Heavy duty compressor sound blanket for quiet operation

CABINET

Full metal louvered jacket coil guard protection
Controls located in corner post for easy installation and service
Rounded corners for safety and attractive, clean appearance
Baked polyester paint finish over galvanized steel for maximum durability
PVC coated wire fan discharge grille
External gauge ports for easy service
Raised base pan with drain ports allows for excellent water and debris drainage

COIL

Enhanced aluminum fins and copper tubing for high efficiency and capacity
Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow

COMPONENTS

Full metal jacket panels remove with just two screws per panel for easy coil cleaning and service
Bi-directional filter drier for long-lasting durability and system protection
Discharge muffler for quiet operation
High pressure switch
Reliable, solid-state, time-initiated, temperature terminated defrost system
Comfort Alert 2 diagnostics factory installed
Defrost control is Quiet Shift™ capable
Service valves positioned for quick installation and easy service
Low pressure switch for loss of charge system protection
Trade available components
Defrost control features built in diagnostics for easier service
Defrost control has short cycle protection to protect the compressor with field selectable 30/60/90 minue defrost cycle

DESIGN

Designed for ambients up to 125ºF

ACCESSORIES

Low ambient kit
Crank Case Heater

4SHP16LT

10-year limited parts warranty available

Model Number(s): 4SHP14LE

COMPRESSOR

High-efficiency scroll compressor
R410a refrigerant
Grommet-mounted compressor for quiet operation
Internally protected against high temperature motor overload conditions
Heavy-duty compressor sound blanket for quiet operation

Rounded corners for safety and attractive, clean appearance
Baked polyester paint finish over galvanized steel for maximum durability
PVC-coated wire fan discharge grille
External gauge ports for easy service
Raised base pan with ports allows for excellent water and debris drainage
Low pressure switch for loss of charge system protection
Trade-available components
Defrost control features built-in diagnostics for easier service
Defrost control has short cycle protection to protect compressor
Defrost control is Quiet Shift capable
Defrost cycle is field selectable 30/60/90 minutes

DESIGN

Designed for ambients up to 125°F

COIL

Enhanced aluminum fins and copper tubing for high efficiency and capacity
Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow

COMPONENTS

Full metal louvered panels remove with just two screws per panel for easy coil cleaning and service
Bi-directional filter drier for long-lasting durability and system protection
Discharge muffler for quiet operation
Reliable, solid state, time-initiated, temperature terminated defrost system
Service valves positioned for quick installation and easy service

ACCESSORIES

High pressure cutout kit
Fossil fuel kit
Outdoor thermostat/low-ambient compressor cutout kit
Thermal expansion valve kits

4SHP14LE

10 year limited warranty on compressor

5 year limited warranty on all parts

Extended warranty available

Model Number(s): 2SHP14LE

COMPRESSOR

High-efficiency scroll compressor
R-22 Refrigerant
Grommet-mounted compressor for quiet operation
Internally protected against high temperature motor overload conditions
Heavy-duty compressor sound blanket for quiet operation

CABINET

Full metal louvered panel coil guard protection
Controls located in corner post for easy installation and service
Rounded corners for safety, attractive, clean appearance
Baked polyester paint finish over galvanized steel for maximum durability
PVC-coated wire fan discharge grille
External gauge ports for easy service
Raised base pan with ports allows for excellent water and debris drainage

COMPONENTS

Full metal louvered panels remove with just two screws per panel for easy coil cleaning and service
Bi-directional filter drier for long-lasting durability and system protection
Discharge muffler for quiet operation
Reliable, solid state, time-initiated, temperature terminated defrost system
Service valves positioned for quick installation and easy service
Low pressure switch for loss of charge system protection
Trade-available components
Defrost control features built-in diagnostics for easier service
Defrost control has short cycleprotection to protect compressor
Defrost control is Quiet Shift capable
Defrost cycle is field selectable 30/60/90 minutes

DESIGN

Designed for ambients up to 125°F

COIL
Enhanced aluminum fins and copper tubing for high efficiency and capacity
Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow

ACCESSORIES

High pressure cutout kit
Fossil fuel kit
Outdoor thermostat/low-ambient compressor cutout kit
Thermal expansion valve kits

2SHP14LE

10 year limited parts warranty available (5 year compressor)

See limited warranty document for details

Model Number(s): 4SHP13LE

COMPRESSOR

High efficiency scroll compressor
R410a refrigerant
Grommet mounted compressor for quiet operation
Internally protected against high temperature motoroverload conditions
Heavy duty compressor sound blanket for quiet operation

CABINET

Full metal louvered jacket coil guard protection

Controls located in corner post for easy installation and service
Rounded corners for safety and attractive, clean appearance
Baked polyester paint finish over galvanized steel for maximum durability
PVC coated wire fan discharge grille
External gauge ports for easy service
Raised base pan with drain ports allows for excellent water and debris drainage

COIL


Enhanced aluminum fins and copper tubing for high efficiency and capacity
Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow

COMPONENTS


Full metal jacket panels remove with just two screws per panel for easy coil cleaning and service
Bi-directional filter drier for long-lasting durability and system protection
Discharge muffler for quiet operation
High pressure switch
Reliable, solid-state, time-initiated, temperature terminated defrost system
Defrost control is Quiet Shift™ capable
Service valves positioned for quick installation and easy service
Low pressure switch for loss of charge system protection
Trade available components
Defrost control features built in diagnostics for easier service
Defrost control has short cycle protection to protect the compressor
Defrost cycle is field selectable 30/60/90 minutes

DESIGN

Designed for ambients up to 125ºF

ACCESSORIES
Fossil fuel kit
Low ambient kit
Crank Case Heater

4SHP13LE

10 year limited parts warranty available

Model Number(s): 2SHP13LE

COMPRESSOR

High efficiency scroll compressor
R22 refrigerant
Grommet mounted compressor for quiet operation
Internally protected against high temperature motor overload conditions
Heavy duty compressor sound blanket for quiet operation

CABINET

Full metal louvered jacket coil guard protection
Controls located in corner post for easy installation and service
Rounded corners for safety and attractive, clean appearance
Baked polyester paint finish over galvanized steel for maximum durability
PVC coated wire fan discharge grille
External gauge ports for easy service
Raised base pan with drain ports allows for excellent water and debris drainage

COIL


Enhanced aluminum fins and copper tubing for high efficiency and capacity
Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow

COMPONENTS

Full metal jacket panels remove with just two screws per panel for easy coil cleaning and service
Bi-directional filter drier for long-lasting durability and system protection
Discharge muffler for quiet operation
Reliable, solid-state, time-initiated, temperature terminated defrost system
Defrost control is Quiet Shift™ capable
Service valves positioned for quick installation and easy service
Low pressure switch for loss of charge system protection
Trade available components
Defrost control features built in diagnostics for easier service
Defrost control has short cycle protection to protect the compressor
Defrost cycle is field selectable 30/60/90 minutes

DESIGN

Designed for ambients up to 125ºF

ACCESSORIES

High pressure cutout kit
Fossil fuel kit
Outdoor thermostat/low-ambient compressor cutout kit
Thermal expansion valve kits

2SHP13LE

10 year limited parts warranty available (5 year compressor)

See limited warranty document for details

Model Number(s): 2SHP13LB

COMPRESSOR

High efficiency scroll compressor
Grommet mounted compressor for quiet operation
Internally protected against high temperature motor overload conditions
R22 refrigerant

CABINET

Full metal louvered jacket coil guard protection
Controls located in corner post for easy installation and service
Rounded corners for safety and attractive, clean appearance
Baked polyester paint finish over galvanized steel for maximum durability
External gauge ports for easy service
Raised base pan with drain ports allows for excellent water and debris drainage

COIL


Enhanced aluminum fins and copper tubing for high efficiency and capacity
Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow

COMPONENTS

Full metal jacket panels remove with just two screws per panel for easy coil cleaning and service
Bi-directional filter drier for long-lasting durability and system protection
Discharge muffler for quiet operation
Reliable, solid-state, time-initiated, temperature terminated defrost system
Defrost control is Quiet Shift™ capable
Service valves positioned for quick installation and easy service
Low pressure switch for loss of charge system protection
Integrated control with LED diagnostics
Trade available components
Defrost control features built in diagnostics for easier service
Defrost control has short cycle protection to protect the compressor
Defrost cycle is field selectable 30/60/90 minutes

DESIGN

Designed for ambients up to 125ºF

ACCESSORIES

High pressure cutout kit
Fossil fuel kit
Outdoor thermostat/low-ambient compressor cutout kit
Thermal expansion valve kits

2SHP13LB

10 year limited parts warranty available (5 year compressor)

See limited warranty document for details

Model Number(s): EFC



Call for Price.

Model Number(s): EFV



Call for Price.

Model Number(s): BCS2



Call for Price.

Model Number(s): BCS2V



Call for Price.

Model Number(s): LENNOXSUNSOURCE

Coming soon. Be one of the first to have this unit installed in your home. Call us today to learn more.

Call for Price.

Model Number(s): THX9321R5000

Elegant simplicity.

•World's first high-definition, full-color thermostat
•Patented, interview-based programming and installer set-up
•USB port for transferring installer setup options and adding dealer logo on-screen
•RedLINK-enabled to work with the Portable Comfort Control and Wireless Outdoor Sensor
•Displays outdoor temperature and humidity
•Wireless humidity control with TrueSTEAM™

Model Number(s): TH8321U1006/TH8320U1008/TH8110U1003

Maximum comfort and energy savings made effortless.

•Effortless, menu-driven programming
•Up to 3H/2C - conventional and heat pump
•Real-time clock
•Large 10-square-inch touchscreen display
•5-Year warranty

Model Number(s): YTH9421C1010/YTH9421C1002/TH9421C1004/THM5421C1008

Manage temperature, humidification, dehumidification and ventilation - all from a single control, and with only three wires.

•All-in-one control - temperature, humidification, dehumidification, ventilation
•Up to 3H/2C Conventional and 4H/2C Heat Pump
•Touchscreen 7-day programmable
•Smart change/check reminders
•Easily upgrade to multi-stage equipment
•5-Year warranty

Model Number(s): YTH6320R1015/YTH6320R1001

The problem solver.

•Everything you love about FocusPRO - now wireless
•Relocate a thermostat or upgrade equipment without running new wires
•Available in programmable and non-programmable models
•Dual fuel enabled models available
•RedLINK-enabled to work with the Portable Comfort Control and Wireless Outdoor Sensor
•Displays outdoor temperature and humidity
•Universal application: 3 heat, 2 cool

Model Number(s): TH6320U1000/TH6220D1028/TH6110D1021

Simplicity and comfort that's easy to see - and easy to program.

•Easy-access battery replacement
•Built-in instructions
•Largest display in its class
•Up to 2H/2C - conventional and heat pump
•5-Year warranty

Model Number(s): TH4110D1007/TH4210D1005

Basic programmable comfort.

•Built-in instructions
•Easy-to-read backlit, digital display
•Models available for 2H/1C heat pumps and 1H/1C applications
•Dual-powered (battery and/or hardwire)
•5-Year warranty

Model Number(s): TH2110D1009/TH2210D1007

Right brand. Right price.

•Basic operation
•Budget price
•Models available for 2H/1C heat pumps and 1H/1C applications

Model Number(s): TH1110D1000/TH1210D1008

Right brand. Right price.

•Basic operation
•Budget price
•Models available for 2H/1C heat pumps and 1H/1C applications

Model Number(s): TH5320U1001/TH5220D1029/TH5110D1022/TH5220D1003

Simplicity and comfort that's easy to see.

•Easy-access battery replacement
•Largest display in its class
•Up to 3H/2C - conventional and heat pump
•Dual-powered (battery and/or hardwire)
•5-Year warranty

Model Number(s): TH3110D1008/TH3210D1004

Basic comfort.

•Easy-to-read backlit, digital display
•Models available for 2H/1C heat pumps and 1H/1C applications
•Dual-powered (battery and / or hardwire)
•5-Year warranty

Model Number(s): T8775A1009/T8775C1005

An up-to-date twist on a Honeywell classic.

•Digital display
•One-touch backlight
•Familiar twist-to-set operation
•Available in heat/cool and heat only models
•5-Year warranty

Model Number(s): T87K1007/T87N1000/T87N1026

Improved design makes it better than ever.

•World's most popular thermostat
•Available in heat/cool and heat only models
•Now mercury-free
•5-Year warranty

Model Number(s): T8034N1007/T834N1002/T834L1004/T822K1000

The economic choice for meeting mercury-free regulations.

•Available in heat/cool and heat only models
•Budget price
•Meets mercury-free requirements
•5-Year warranty

Model Number(s): TL7235A1003/TL8230A1003

Consistent, contemporary comfort control.

•On-demand backlit display
•Maintenance free - no batteries required
•Soundproofed for quiet operation
•5-Year warranty

Model Number(s): TL7230A1004

Simple to use. Consistent comfort.

•Single control dial for easy temperature setting
•Maintenance free - no batteries required
•Soundproofed for quiet operation
•5-Year warranty

Model Number(s): HM512VPIAQ/HM512DG115/HM509VPIAQ/HM509DG115

The next generation of humidification systems from Honeywell.

•Available in 6, 9 and 12 gallon models
•1:1 humidification delivery rate - operates independent of HVAC equipment
•Mounts in minutes - requires only 1-3/4" cut into ductwork
•Application flexibility - can be remotely mounted up to 20 feet from system
•Uses up to 90% less water
•5-Year Warranty

Model Number(s): HE365A1006/HE365B1004

Moisturize for complete comfort.

•Good choice for variable speed and multi-stage systems
•UV Stabilizer with Carbon Black to help protect from damaging UV exposure
•PerfectFLO® tray for even moisture distribution
•5-Year Warranty

Model Number(s): HE225A1006/HE225B1004/HE265A1007/HE265B1005

Enhance and protect your home.

•Can be installed on the return or supply duct for better application flexibility
•Integrated seasonal damper
•UV Stabilizer with Carbon Black to help protect from damaging UV exposure
•PerfectFLO© tray for even moisture distribution
•5-Year Warranty

Model Number(s): DH150A100/DH90A1015/DH65A1015

High-capacity dehumidification, ventilation and air filtration

•Removes up to 150 Pints/Day of Moisture
•Uses only 6.9 Amps for Energy Efficiency
•Built-In 6" Ventilation Port
•Provides MERV 11 Filtration
•Integrated Solution - Can be centrally ducted for whole-house control or operate un-ducted to address moisture problem areas
•5-Year Warranty
•ENERGY STAR© Rated

Model Number(s): DH90A1015/DH65A1015

All-in-one dehumidification, ventilation, and filtration.

•Removes up to 90 Pints/Day of Moisture
•Uses Only 6.2 Amps for Energy Efficiency
•Built-in Ventilation Port
•Provides Merv 11 Filtration
•Integrated Solution - Can be centrally ducted for whole-house control or operate unducted to address moisture problem areas
•5-Year Warranty
•ENERGY STAR© Rated

Model Number(s): DH65A1015

Compact, easy-to-install dehumidification.

•Removes up to 65 Pints/Day of Moisture
•Compact Size for Installation Flexibility
•Provides Merv 11 Filtration
•Integrated Solution - Can be centrally ducted for whole-house control or operate unducted to address moisture problem areas
•5-Year Warranty
•ENERGY STAR© Rated

Model Number(s): F300E1001/F300E1017

The high-performance renewable, low-maintenance solution to cleaner air.

•Captures up to 100% of airborne particles passing through the system
•Self-regulating power supply maintains high efficiency as the filter loads
•Test button to verify operation
•Optional anti-microbial postfilter to increase efficiency and provide replacement opportunity
•Also available in a Return Grille Model (F52)
•5-Year warranty

Model Number(s): F500A1000/F500B1009

Hospital-quality air for your home.

•Provides a superior level of filtration
•Captures 99.97% of 0.3 micron particles over the life of the filter
•Three-stage filtration process includes activated carbon filter to help reduce odors
•Includes AirWatch™ Filter Replacement Indicator
•5-Year warranty

Model Number(s): F200E1003/F200E1029/F200E1011/F200E1037

Maintains excellent airflow.

•Captures up to four times more airborne particles passing through the filter than the F100 Media Air Cleaner
•Pressure sensor in door indicates pressure drop and transmits to wireless receiver
•Includes Wireless AirWatch™ Filter Replacement Indicator
•5-Year warranty

Model Number(s): F100F1004/F100F2028/F100F1012/F100F2002

Cleaner indoor air.

•Captures up to 37 times more airborne particles passing through the filter than a standard 1" filter
•Six space-saving sizes to fit any application
•Free private labeling ensures filter replacement calls
•5-Year warranty

Model Number(s): FC40R1185/FC40R1136/FC40R1830/FC40R1003

Cleaner air with less effort.

•Captures up to 37 times more airborne particles passing through the filter than a standard 1" filter
•18 sizes to fit most return grille applications
•Provides four inches of filtration in a one-inch grille, with three times the life of a standard one-inch filter

Model Number(s): POPUP1620/POPUP1625/POPUP2020/POPUP2025

More filters. Less hassle.

•No assembly required
•Collapsible design
•Available in six sizes that fit Honeywell and competitive units
•Store up to five filters in the space you used to store just one

Model Number(s): RPGE13

Refrigerant System

Environmentally friendly R410A refrigerant
Copper tubing with enhanced fin coils
External service gauge ports

Heat Exchanger

Aluminized steel tapered S-curve
Crimped no weld construction for longer life
L models comply with California Energy Commission Low NOx regulations

Cabinet Construction

Low profile, with compact footprint
Insulation to minimize heat loss plus reduce sound
Baked on pre painted steel cabinet finish
Easy service access
Wire grill protection
One piece “no leak” top design

Blower

Insulated compartment to reduce sound
High efficiency multispeed motor for wide airflow range

Controls

Solid state integrated blower control board with L.E.D. diagnostics
Direct spark ignition

Installation

Full perimeter base rail system for easy installation
Horizontal or down discharge, duct covers provided

Utility connections on “right side”
Filter channels for 1" filter field provided

RPGE13

Warranty

10 year limited parts and compressor warranty / lifetime heat exchanger warranty available.
See limited warranty document for details.

Model Number(s): Envision/Premier/Synergy3D/Versatec

WaterFurnace Envision products set the industry standard for efficiency, reliability and quiet operation. Available in seven single speed sizes and five dual capacity sizes, Envision units provide exceptional performance. All Envision units utilize the ozone-safe R-410A refrigerant to meet the most stringent EPA requirements now and for many years to come. Coated air coils add durability and longer life. A sophisticated microprocessor control sequences all components during operation for optimum performance, and provides easy-to-use troubleshooting features with fault lights and on-board diagnostics. Unit configurations include horizontal, vertical top discharge and vertical bottom discharge. Heavy-gauge metal cabinets are coated with durable poly paint for long lasting protection. Envision products represent the Company's highest efficiency units combined with features that provide the ultimate in performance and reliability.

Model Number(s): EarthWise™ CenTraVac™

Standard Features

The following features are provided as standard with all Trane CenTraVac™ chillers:

• Isolation pads.
• Tracer™ chiller control strategies.
• Purge capability when chiller is off.
• Two-stage or single-stage economizer.
• Prewired instrument and control panel.
• Phase voltage sensors (3-phase).
• Startup and operator instruction service.
• High efficiency purge system with automatic regeneration capability.
• Low-pressure operation that minimizes the chance for outward refrigerant leaks.
• Minimum 5 year leak-tight warranty based on service documentation of leak rates 0.5 percent per year of the chiller’s refrigerant charge. Extendable to the lifetime of the chiller with a Trane service contract.
• Hermetically sealed and precision cooled by liquid refrigerant that keeps the motor, drive, and equipment room temperatures controlled, monitored, and predictable by design. Taking predictable reliability to yet another level, this feature also protects against motor-destroying elements such as dust, grit, metal shavings, high humidity, high ambient operating temperatures, and process liquids or gases.
• Oil heater.
• Oil and refrigerant charge.
• Ability to meet or exceed ASHRAE 90.1-2004.
• Complies with ASHRAE Standard 147.
• Motor control and compressor protection.
• Hot water control and ice-making control.
• Wiring and conduit for purge and oil system interconnection to the main control panel.
• On-line tolerance for quick changes in refrigerant loop conditions, variable pumping strategies, and other atypical operating requirements.
• Entering condenser water temperature down to 50°F (10°C) maintaining 3 psid differential pressure.
• Designed to be rugged and simple yet amazingly quiet, the CenTraVac is directly driven at low speed with a motor shaft that is supported by two aircraft-turbine-rated bearings.

The design includes industrial-grade components and only one primary moving part. Likewise, the design purposely excludes speed-increasing gears and lightweight parts that, while accessible, have a higher failure rate.

Standard and Optional Features

Features and Benefits

Optional Features

Trane offers a selection of optional features to augment the standard chiller installation or to modify the chiller for special purpose applications.
• Spring isolators
• Refrigerant monitor
• Industrial paint option
• SAE HS-1738 compliance
• Chiller break apart (disassembly)
• Three-pass or one-pass evaporator
• High-pressure (300 psig) water side construction
• Medium-voltage (over 600 volts) compressor motor
• Energy saving free cooling, heat recovery, or auxiliary condenser
• Leaving water temperature down to 34°F (1.1°C) without glycol
• Chilled-water reset based upon outside air temperature
• Special paint and controls for outdoor use or corrosive environments
• Special tubing: smooth bore, CuNi, and various tube wall thicknesses
• UL label
• Variable-speed drives
• Enhanced condenser limit control
• Factory-applied thermal insulation
• Industrial high-fault, 100,000 short-circuit rating (SCR) starters
• Building automation system (BAS) interface
• Industrial packaging of controls and electrical wiring
• Marine waterboxes for evaporators and condensers
• Proof of predicted performance and sound pressures
• Extended operation control for external ice-building, base loading, and providing hot-water
• Complete line of compressor motor starters—factory installed and prewired if unit-mounted

Model Number(s): RPHP13

Refrigerant System

Environmentally friendly R410A refrigerant
Copper tubing with enhanced fin coils
External service gauge ports

Cabinet Construction

Low profile, with compact footprint
Insulation to minimize heat loss plus reduce sound
Baked on pre painted steel cabinet finish
Easy service access
Wire grill protection
One piece “no leak” top design

Blower
Insulated compartment to reduce sound
High efficiency multispeed motor for wide airflow range

Controls

Integrated control with L.E.D. diagostics
Defrost control board with field selectable time intervals
High and low refrigerant pressure switches for system protection

Installation

Full perimeter base rail system for easy installation
Horizontal or down discharge, duct covers provided
Utility connections on “right side”
Filter channels for 1" filter field provided

RPHP13

Warranty

10 year limited parts and compressor warranty / lifetime heat exchanger warranty available.
See limited warranty document for details

Model Number(s): RPCE13

Refrigerant System

Environmentally friendly R410A refrigerant
Copper tubing with enhanced fin coils
External service gauge ports

Cabinet Construction

Low profile, with compact footprint
Insulation to minimize heat loss plus reduce sound
Baked on pre painted steel cabinet finish
Easy service access
Wire grill protection
One piece “no leak” top design

Blower

Insulated compartment to reduce sound
High efficiency multispeed motor for wide airflow range

Installation
Full perimeter base rail system for easy installation
Horizontal or down discharge, duct covers provided
Utility connections on “right side”
Filter channels for 1" filter field provided

RPCE13

Warranty

10 year limited parts and compressor warranty / lifetime heat exchanger warranty available.
See limited warranty document for details.

Model Number(s): GT024/GT036GT048/GT060/GS072

GeoComfort systems deliver the best in geothermal heating and cooling for every home existing or new construction, large or small. GeoComfort delivers unsurpassed comfort, energy savings and environmental benefit with systems so quiet and so inexpensive to operate and maintain, you'll forget they are there.

GeoComfort is proud to provide highly efficient, reliable and quiet operating, year-round comfort solutions for your home or business. Our diverse product line offers a solution for any application.
GeoComfort Systems are manufactured in the heart of America. Pride in workmanship has been deeply embedded in the culture of our company. Every department places a high value on integrity and complete customer satisfaction. “World Class Service – Hometown Values” is far more than a slogan, it’s a way of life.
Along with unmatched quality, GeoComfort systems also offer a host of standard features that make them second-to-none in the industry.

Standard Features

Non-Ozone Depleting R-410A Refrigerant
Appliance White Powder Coated Steel Construction
Bolted Together Cabinets, not screwed
All Panels Removable for Easy Service
Coated Air Coils For Extended Life
Bidirectional Expansion Valve
Variable Speed ECM Blower Motors
Corrosion-Proof, Stainless Steel, Drain Pans
ETL Certified to UL & CSA Standards
AHRI Certified to ISO Standards
Copper Coaxial Water Heat Exchanger
Flow Switch Protected
Fault Retry To Eliminate Nuisance Service Calls
High Efficiency Copeland Scroll Compressors
10 Year Limited Residential Warranty
Optional features
Cupro-nickel Coaxial Water Heat Exchanger
Hot Water Generator (Desuperheater)
Field installed internal electric heat
Extended warranties

Model Number(s): EC/EM/ES/EV/GS/GT/AU/AP/WW/WP/CA/CS

Units shall be performance certified to ISO standard 13256-1 for Water Loop Heat Pump, Ground Water Heat Pump and Ground Loop Heat Pump applications. Units intended for use on ground loop applications shall have an optional extended range package installed. Units shall be Underwriter Laboratories (UL and cUL) listed for safety on all models. Each unit shall be run tested at the factory. Each unit shall be pallet mounted and stretch wrapped. The units shall be manufactured in an ISO9001:2000 certified facility. The units shall be warranted by the manufacturer against defects in materials and workmanship for a period of one year on all parts, and 5 years on the compressor. The units shall be designed to operate with entering fluid temperatures between 50°F (10°C) and 100°F (38°C) in cooling and between 50°F (10°C) and 80°F (27°C) in heating. With the optional factory installed extended range package units shall operate with entering fluid temperatures between 50°F (10°C) and 110°F (43.3°C) in cooling and between 25°F (-3.9°C) and 80°F (27°C) in heating.

CASING & CABINET

The cabinet shall be fabricated from heavy-gauge steel finished with Galvalume® plus, an aluminum-zinc alloy with a clear acrylic coating for additional corrosion protection. The interior shall be insulated with ½” (12.7mm) thick, multi density, coated, glass fiber. All units shall allow sufficient service access to replace the compressor without unit removal. One blower and two compressor compartment access panels shall be removable with supply and return ductwork in place. A duct collar shall be provided on the supply air opening. A 2" (50.8mm) return air filter rack/duct collar with 1" (25.4mm) thick filters shall be provided with each unit. The units shall have an insulated divider panel between the air handling section and the compressor section to minimize the transmission of compressor noise, and to permit service testing without air bypass. Units shall have a stainless steel condensate drain pan. Units shall have a floating base pan consisting of a ½” (12 mm) thick high density rubber pad between the compressor/condenser base plate and the unit base pan.

REFRIGERATION CIRCUITS

Units shall utilize refrigerant R-410A. All units shall contain a sealed refrigerant circuit including a hermetic compressor, capillary tube metering device with strainer or balance port expansion valve, refrigerant drier, finned tube air-to-refrigerant heat exchanger, refrigerant reversing valve and service ports. Compressor shall be high efficiency, designed for heat pump duty, internally spring isolated (if reciprocating type) for maximum sound attenuation and mounted on rubber vibration isolators. Compressor motors shall be equipped with overload protection. Refrigerant reversing valves shall be pilot operated sliding piston type with replaceable encapsulated magnetic coils energized only during the cooling cycle. The finned tube coil shall be constructed of lanced aluminum fins not exceeding fourteen fins per inch bonded to rifled copper tubes in a staggered pattern not less than three rows deep and have a 450 PSIG (3100 kPa) working pressure. Coils shall have a baked polyester enamel coating for protection against most airbourn chemicals. The coil shall have aluminum end sheets. The coaxial water-to-refrigerant heat exchanger shall be constructed of a convoluted copper (optional upronickel) inner tube and steel outer tube with a designed refrigerant working pressure of 450 PSIG (3100 kPa) and designed water side working pressure of no less than 400 PSIG (2750 kPa).

EXTENDED RANGE PACKAGE

An optional extended range package shall include a bi-flow balanced port expansion valve metering device in place of capillary tubes and insulated water to refrigerant heat exchanger.

FAN MOTOR & ASSEMBLY

The fan shall be direct drive centrifugal forward curved type with a dynamically balanced wheel. The housing and wheel shall be designed for quiet low velocity operation. The fan housing shall be removable from the unit without disconnecting the supply air ductwork for servicing of the fan motor. The fan motor shall be three speed PSC type for direct drive units and single speed for belt drive units. The motor shall be permanently lubricated and have thermal overload protection.

ELECTRICAL

Controls and safety devices will be factory wired and mounted within the unit. Controls shall include fan relay, compressor contactor, 24V transformer, reversing valve coil and solid state lockout controller (UPM) The UPM controller shall include the following features: Anti-short cycle time delay, random start, brown out/surge/power interruption protection, 120 second low pressure switch bypass timer, shutdown on high or low refrigerant pressure safety switch inputs, shutdown for the optional freezestat or high level condensate sensors, 24 VAC alarm output for remote fault indication, unit reset at thermostat or disconnect, ability to defeat time delays for servicing and automatic intelligent reset. The UPM shall automatically reset after a safety shut down and restart the unit, if the cause of the shut down no longer exists, after the anti-short cycle and random start timers expire. Should a fault re-occur within 60 minutes after reset, then a permanent lockout will occur. A light emitting diode (LED) shall annunciate the following alarms: high refrigerant pressure, low refrigerant pressure, low water temperature and a high level of condensate in the drain pan (when equipped with the optional low water temperature and high level condensate sensors). The LED will display each fault condition as soon as the fault occurs. If a permanent lockout occurs, then the fault LED will display the type of fault until the unit is reset. Safety devices include a low pressure cutout set a 40 PSIG (280 kPa) for loss of charge protection (freezestat and/or high discharge gas temperature sensor is not acceptable) and a high pressure cutout control set at 600 PSIG (4125 kPa). An optional energy management relay that allows unit control by an external source shall be factory installed. A terminal block with screw terminals shall be provided for control wiring.

PIPING

Supply, return water and condensate drain connections shall be brass female pipe thread fittings and mounted flush to cabinet exterior with optional stainless steel, Braided hose kit with swivel connectors.